Build A Man Cave Bar By Yourself
Having a man cave bar custom-made and installed in your space can be very expensive – the good news is that you can design and build the perfect bar on your own this weekend without breaking the bank. Here are several ways to build your own man cave bar. The two side panels of the bar will be constructed from two short and two long boards. Using a circular saw, cut four of the 2×4 wooden boards to a length of 42 inches. The, cut four more 2×4 wooden boards to a length of 15 inches. Place the shorter 15 inch boards inside the larger 42 inch boards to create a rectangular frame. Secure the boards together using nails. Using a circular saw, cut two more of the 2×4 wooden boards to a length of 42 inches and another two 2×4 wooden boards to a length of 84 inches. Again, place the shorter 42 inch boards inside the larger 84 inch boards and secure them with nails to create rectangular frames. Begin by measuring the dimensions of each side panel. Using a table saw cut a piece of fiberboard to cover each of the side panels.
Then, measure and cut an additional piece of fiberboard to cover the front panel. Attach the fiberboard initially with wood glue, followed by nailing the pieces together. Using two 4×4 posts, connect the front panel to the two side panels. The posts should be cut to a length of 42 inches. Begin by positioning the first side panel and the front panel at a 45 degree angle with one of the posts. Toenail the post and panels together to form the corner of the man cave bar. Repeat this process to attach the remaining side panel.