Hang Curtains In A Canopy Bed
There are several instructions to hang curtains in your canopy bed. Here are some of them. Set up the stepladder in the room where you can add the curtains to the preassembled canopy bed without completely disassembling the bed. Using a hex wrench or screwdriver, disassemble the canopy rails from the bed frame posts, one end at a time, one rail at a time. Slide the rod pocket of the curtain panel over one rail, sliding it all the way to the opposite end, still attached to the bedpost. Slide a second curtain panel’s rod pocket over the rail, keeping the bulk of it near the open end. Reattach the rail containing two panel curtains to the bed post with the hex wrench or screwdriver before disassembling the next canopy rail. Repeat steps 3 and 4 until all eight curtains are on all four canopy rails.
Adjust the curtains to gather them into the four corners of the canopy bed. Use tiebacks placed about halfway down the bed posts to gather the two curtains in each corner into one sweeping pool of fabric. Adjust the gathers at top for evenness, leaving space in the middle of each rail for openness. Wrap silk floral garland or strands of minilights around the canopy rails, disguising ends in the curtains and running cords down the bed post in the gathers of the curtains, if desired. Plug twinkle lights into a timer for a romantic nightlight effect.