Installing Retractable Ceiling Lights
There are instructions to installing retractable ceiling lights. Here are some of them. Turn off the circuit breaker that controls the current ceiling lights. Flip the light switch several times to verify power is off to the fixture. Remove the old fixture. Screw the mounting bracket into the ceiling box. Pull out the neutral wire, which is typically white, from the retractable light fixture. Twist the copper end of the white wire on the fixture with the copper end of the white wire in your ceiling box clockwise until a connection is made. Cover with a plastic wire nut. Repeat with the black wire, which is the live wire. Repeat again with the ground wire, which is typically green. Screw long bolts from the new fixture into the ceiling box.
Position the ceiling lights over the screws so the screws from the ceiling box fit into the keyholes on the retractable ceiling light. Turn the fixture until it locks into place. Check your owner’s manual for specifics on how to hang your fixture. Place bulbs in the fixture and test by turning the light fixture on and off. Adjust the height of the fixture. It is common to leave the fixture up most of the time and bring it down for task lighting.