Ways To Re Stain Wooden Bed Frames
Wooden bed frames are sturdy, more secure and easier to move than metal bed frames. However, many wood bed frames come from the manufacturer stained almost black, a style that’s too dark for many people. But, you don’t have to live with that depressing frame. Stain is only a few centimeters deep. Here are instructions to rea-stain wooden bed frames. Remove the mattress and box springs. Use a small socket set to dismantle the frame into four large pieces. Place them one at a time across two sawhorses. Sand the frame parts using 100-grit sandpaper on a hand block. Sand parallel to the grain until you’ve sanded down to bare wood. You will need to sand through the lacquer first. Typical bed frames have only minimal coats of lacquer. It comes off easily. Change the sandpaper every few minutes or whenever it gets slick. Sand inside curves or spindles by wrapping them with the sandpaper. Twist the sandpaper back and forth with the palm of your hand like you’re sharpening a pencil. Fold the sandpaper and use the sharp edge of it to sand inside tight spots or edges. Sand all of the parts until they look like bare wood. When there are no shiny spots, you’re finished.
Dip a soft cloth into an open can of stain. Wipe the stain onto the frame parts until they are wet with stain. Immediately wipe the stain off. Wait 30 minutes for the stain to dry. Spray the frame with one coat of aerosol lacquer. Wait 15 minutes and sand the frame by hand with 180-grit sandpaper. Spray another coat on the frame to finish. Wait four hours before reassembling the frame. Allow 24 hours for the lacquer to cure before using the bed frames.
wooden bed frames images, bed frames images, wooden bed frames pics, bed frames furniture, wooden bed frames, .