Do It Yourself Create Platform Beds
Platform beds support a single mattress or futon on a slatted top. A platform bed is certainly one of the easiest bed frames to build on your own, and is arguably one of the easiest do-it-yourself projects in general. Here are instructions to create platform beds. Sand all faces of your lumber. It doesn’t have to be polished smooth, but you want to avoid splinters and snags for both people and your mattress. Lay two beams on their 2-inch wide faces. The beams should be parallel, with ends aligned and their outside edges 75 inches apart. Lay the third beam at the center point between the first two beams, also parallel to and aligned with the other beams. Set the plywood sheet on top of the beams. Its 54-inch edges should align with the outside edges of the outside beams. Its 75-inch edges should align with the ends of all three beams.
Screw the plywood in place with three wood screws spaced evenly along each beam. Aim for the midline of each beam as you drive the screw through the plywood. Apply a coat of paint to the visible surfaces of the platform. Allow paint to dry according to the package instructions. These plans are for a full-size platform bed. If you want larger or smaller platform beds, adjust the dimensions of the plywood and the length of the beams.platform beds diy, platform beds furniture, platform beds images, platform beds pictures, platform bed frame images, .